Armrest Lock: A specially designed steel bar that attaches between Combi’s armrest and frame, securing the armrest in the horizontal position. A simple press-and-pull motion releases one end of the bar, restoring movement to the armrest when needed. Recommended for use in conjunction with the following:
- Combi-Tilt – Without lock, armrests may inadvertently fold up while chair is reclined
- Front Cross Bar – Lock secures bar/armrest assembly while patient is holding on for support
- Compatible with all Combi models
Headrest: Ideal for patients wanting comfortable support for their head and neck while seated in their Combi; especially recommended for Combi – Tilt models
- Adjustable Height – one-handed operation of lower press-and-turn knob allows you to slide headrest up and down 9.5 in (25 cm) to fit patient
- Adjustable Angle – one-handed operation of upper press-and-turn knob allows for optimal angle positioning up to 45° backward, 180° forward
- Broad, Contoured Support – headrest pad cradles back and sides of patient’s lower head and neck, conforming to natural curves of spine and keeping head comfortably facing forward
- Soft and Durable – padded polyurethane construction of headrest pad adjusts to patient’s temperature and offers ideal balance of comfort and support; easy to wipe clean
- Available for all Combi models
Soft Backrest – Replacing the standard fiberglass/plastic backrest, the Soft Backrest attaches around the chair’s frame firmly and simply using commercial grade Velcro. No tools required. Designed for patients weighing up to 330 lbs (150 kg).
- Adjustable – loosen or tighten four Velcro straps to adjust Soft Backrest to comfort of patient
- Machine Washable – undo Velcro straps to remove backrest and toss it in washing machine using favorite detergent; see user manual for details
- Durable – upholstered in Handicare’s special plastic-coated, woven polyester fabric, it tolerates temperatures, elements and constant stretching from daily use
- Comfortable – upholstery comfortably conforms to patient’s shape and body temperature. Internal padding provides ideal amount of resistance to feel both soft and supportive
Footrests: Provide patient with stable footing while chair is in motion, preventing feet from getting caught under chair. Essential during transport.
- Adjustable Height – four available height options, secures firmly into place with Handicare’s snap lock clips and requires no tools
- Swing-Away Design – lift gives 90 degree inward/outward movement, allowing for unobstructed patient transfer to and from chair
- Flip-Up Footpads – quick flip of footpads and patient now has plenty of space to place their feet on floor
- Always use in combination with Combi Tilt and available for all Combi models
Leg Support: Comfortably holds patient’s entire leg in extended position while seated; ideal for certain post-surgery or plaster cast scenarios.
- Cupped Polyurethane Pad – 8.4 in (21.5 cm) wide and 6.4 in – 7.8 in (16.5cm – 20 cm) deep; durable and easy to clean; and conforms to patient’s shape and temperature
- Stainless Steel Frame – attaches easily to the Amputee Support
- Adjustable – one-handed, twist-and-lock operation allows length and multiple angle adjustments for ideal fit and positioning; no tools required
- Swing-Away Design – lift gives 90 degree inward/outward movement, allowing for unobstructed patient transfer to and from chair
- Compatible will all Combi chair models
Front Cross Bar: For patients coping with reduced balance or that have a tendency to fall forward while seated.
- While Seated – patient enjoys convenient bar to hold on to that enables them to sit up straight with no slipping and sliding in chair
- Getting Up/Sitting Down – easily unlocks on either end and swings out to the left or right, where it locks into place parallel to armrest
- Compatible with all standard-width Combi models
Lateral Trunk Support: Features cupped polyurethane pad that holds upper torso side of patient and is adjustable for comfort and fit.
- Width Adjustment – turn screw to adjustment patient’s frame
- Swing Away – lift on lock bolt and move support for easy access to chair
- Height Adjustment – three levels available
- Adjustable Pads – four positions available to conform to patient’s shape
- Available in four models: Right Side – Standard Adjustable Width, Left Side – Standard Adjustable Width, Right Side – Broad Adjustable Width and Left Side – Broad Adjustable Width
Hip Belt: Holds patient securely to their Combi chair and prevents them from sliding forward during use; for patients weighing up to 230 lbs (100 kg).
- Two-Point Length Adjustment – sliding straps on front and back of belt allow for proper fit and comfort
- Padded Nylon Fabric – durable, comfortable and easy to clean
- Quick Clip Safety Buckle – secures easily in one motion; push clips together to release
Heel and Calf Strap: Supports patient’s lower legs, keeping patient’s feet from sliding from foot pads. Prevents injuries that may occur if patient’s feet get caught under chair while in motion. Highly recommended for Combi – Tilt models and compatible with all Combi models.
Amputee Support: Holds patient’s stump in any desired position while seated. Simple to install, it mounts to chair in place of left or right footrest.
- Cupped Polyurethane Pad – 8.4 in (21.5 cm) wide and 6.4 in – 7.8 in (16.5 cm – 20 cm) deep; durable and easy to clean; and conforms to patient’s shape and temperature
- Stainless Steel Frame – installs easily inside Combi’s footrest mount on either side of chair
- Adjustable – one-handed, twist-and-lock operation allows vertical angle adjustment for ideal positioning; no tools required
- Swing-Away Design – lift gives 90 degree inward/outward movement, allowing for unobstructed patient transfer to and from chair
Commode Bucket with Lid: Available in two models and made of durable, high density plastic. Easy to clean and easier to use:
- Gravity Sealed Lid – knob molded into center of lid allows for simple placement and removal, and forms to shape of bucket, providing an adequate seal without snaps or latches
- Integrated Handle – made from plated steel, permanently integrated handle is secure, easy to grasp and conveniently drops to side of bucket when released
- Precision Fit – bucket securely sets within Combi’s standard seat, while providing just enough clearance to allow for effortless removal
Transport Seat Cover: Slips easily over Combi’s standard seat, providing patient a complete and comfortable seating surface when using Combi as a transport chair. The seat cover’s unique, plastic coated and woven polyester upholstery is easy to clean and made to last. Compatible with all Combi models.